Dimond 521

View Additional Photos

Getting Here

95 Main Street
Durham, NH 03824
United States

Select Another Facility

How to Reserve a Non-Registrar Owned Classroom

This room is not under the control of the University Registrar's Office. Please contact the department administration for booking availability.

Using the Dual Boot iMac

To project from the installed Instructor Dual Boot iMac:

Power on or wake up the computer. This computer (as well as the student computers) is capable of running Mac OS or Windows, to switch between operating systems, restart the computer.
Select Windows or Mac OS at the Operating System Selection Screen. Log in to the computer.
Select the Mac source button on the AV touch panel.

HDMI Connection

Make sure your device is powered on and awake.
Connect your device using the supplied HDMI cable.
If your device requires a display adapter, connect adapter to cable first, then connect adapter to your device.
If necessary, select your desired source connection on the AV Touch Panel.

Presenting from a Laptop in a Classroom or Learning Space

If your device requires a display adapter to connect to the provided HDMI cable, follow these steps:
1. Connect the HDMI cable to the display adapter.
2. Connect the adapter to your device.
3. Make sure your device is powered on and awake.
  1. Once connected, your laptop display should appear automatically on the classroom system.
    1. If you need a USB‑C–to‑HDMI adapter, USNH has tested and recommends the Anker 6‑in‑1 USB‑C-to-HDMI Multiport Adapter which is available from Amazon and other retailers.

Note: If your classroom utilizes a USB-C connection, please connect your laptop directly using the provided USB‑C cable only. Do not use this connection with an adapter, as the USB‑C cable is designed to work with most laptops and adapters can prevent proper display and connectivity.

Select your input source and verify display

If the system does not start automatically, use the AV touch panel to select the appropriate input source:
1. HDMI
2. USB‑C
3. AirMedia
After selecting the input, allow the projector or display time to power on. Your computer’s image should appear on the projection screen; this may take up to 60 seconds.

For more information and detailed Windows and Mac troubleshooting, visit the related Knowledge Base Article.